Building a Log Cabin

If you have a vacant property somewhere in the woods, then it would make sense to build a small house that you can use for vacations. You could always hire a contractor to do it for you. But if you are feeling adventurous, then why not do it on your own? Take a construction training course and learn everything that you need to build a cabin by hand.

Read more about construction training course

Create a Plan

Plan things out to make the process go a smooth as possible. Have a reasonable budget and try to make it all fit. List every item and its corresponding cost. Make adjustments as necessary. Sketch out your design on paper or create a 3D model on the computer. See how you can arrange furniture to make everything fit within the limited space.

Get the Materials

If you have a tight budget, then try to get your materials as cheaply as possible. You could get the logs from your own property if you have trees out there. You could also recycle windows and doors from old homes. Just ensure that all these are still in good condition. Borrow or rent tools to hasten the progress.

Establish the Foundation

Once you have everything ready, start the build by digging the foundation and pouring down well below the frost line. This will be the base of the whole structure so pay particular attention to it. A good foundation will allow the cabin to remain habitable for decades while surviving earthquakes, storms, and other natural calamities.

Install the Flooring

Next will be the installation of the ground beams, the joists, and the subflooring. It is crucial that you use the strongest materials that you can afford. A weak floor will break if there are heavy items in the house. Repairs will be costly, so just do it right the first time around.

Build the Walls

Once the floor is done, you can turn your attention to the walls which will be composed of logs in a horizontal stack. Leave space for where the doors and windows are supposed to go. The tricky parts include joining the crisscrossing logs at the corners and ensuring that the logs are level.

Frame the Roof

After the wall has risen, you can finally add a frame on top and enclose the structure with a roof for weather protection. It is best to do all these in the summer so that you are not in a rush to cover things up. Be careful with the frame and roofing to prevent leakage.

Attach the Doors and Windows

It truly looks like a house by now. At this point, you can cover up the holes on the walls with doors and windows. Seal the gaps to avoid draft and increase thermal efficiency.

Treat the Wood

Wood is prone to rot and discolouration if not cared for properly. As a final step, get liquid treatment and apply it all over the surface of the walls. This will seal off the logs and prevent them from absorbing too much moisture from the environment.